iTechworld
iTechworld | Base 4WD Dual Battery Kit | 240Ah Lithium
iTechworld | Base 4WD Dual Battery Kit | 240Ah Lithium
SKU:KIT-4WD-B-240-STD-25
Couldn't load pickup availability
Power your next adventure with the iTechworld Base 4WD Power System. Featuring the iTECH240X PRO 240Ah Lithium LiFePO₄ Battery and the iTECHDCDC40 40A DCDC + MPPT Charger, this system delivers efficient, reliable energy for touring, canopy and off-grid applications.
The iTECHDCDC40 provides fast, smart charging from both your vehicle alternator and solar panels, ensuring your lithium battery is always ready to perform. The Plug and Play 40A DCDC Wiring Kit makes installation simple and professional — ideal for tight or custom canopy setups.
Perfect for caravans, camper trailers, 4WD canopies and touring builds, the iTechworld Base 4WD Power System offers dependable lithium power, efficient dual-source charging, and long service life — built tough for Australian conditions.
Specs
| General | |
| Voltage: | 12V |
| Nominal voltage: | 12.8V |
| C20 rating usable Amps: | 240Ah |
| Short circuit protection: | Yes |
| Optimum temperature range: | 5°C ~ 60°C |
| BMS operational temperature range: | -5°C ~ 80°C |
| Safety protection isolator: | 80°C |
| Recommended charge voltage: | 14.4V |
| Maximum charge current: | 150A |
| BMS charge cutoff: | 15V |
| BMS low voltage cutoff: | 10.5V |
| Series connection: | Up to 48V (4 x batteries) |
| Parallel connection: | Unlimited |
| Life cycles @ 80% depth of discharge: | 5,000+ |
| Life cycles @ 40% depth of discharge: | 10,000+ |
| Continuous Discharge Rate: | 200A |
| Maximum Discharge Rate (5 Seconds): | 640A |
| Dimensions (LxWxH): | 485 x 170 x 239mm |
| Weight: | 24.8kg |
| Terminal type: | M8 |
| Case material: | ABS |
| DCDC40 Charger | |
| Battery capacity: | 80-800Ah |
| Vehicle input voltage: | 9-32V |
| Solar input voltage: | 10-32V |
| Maximum input current: | 45A |
| Input fuse rating: | 60A |
| Continuous output current: | Up to 40A |
| Output fuse rating: | 60A |
| Minimum auxiliary battery charge start voltage | 4V |
| Standby current: | <10mA |
| Battery type: | Standard lead-acid, Gel, AGM, Calcium & LiFePO4 |
| Operating temperature: | -20°C ~ 80°C |
| IP rating: | IP67 |
| Dimensions (LxWxH): | 188 x 127 x 39mm |
| Weight: | 950g |
| Output | |
| Charge type: | 3-Stage |
| Charging profile: | STD | Gel | AGM | Calcium | LiFePO4 |
| Absorption (maximum output voltage): | 14.4V | 14.1V | 14.7 | 15.3V | 14.5V |
| Float voltage: | 13.4V | 13.5V | 13.4V | 13.6V |
| Input | |
| Input: | Turn on | Turn off |
| 12V standard alternator: | >13.2V | <12.8V |
| 24V standard alternator: | >26.2V | <25.6V |
| 12V smart alternator (ignition cable connected): | >12V | <11.8V |
| 24V smart alternator (ignition cable conencted): | >24V | <23.6V |
| Solar: | 16V & 25W | 10V |
| General | |
| Length: | 6m (+ 3m ignition cable extension) |
| Connection: | Three-pin Anderson |
| Thickness: | 6AWG |
| Fuse Size: | 60A |
| Fuse Type: | Midi |
| Includes: | Fuse tap for ignition wire routing |
| product dimensions | |
| A | Length: 485mm |
| B | Width: 170mm |
| C | Height: 239mm (245mm including terminals) |
| product dimensions | |
| A | Length: 188mm |
| B | Width: 127mm |
| C | Depth: 39mm |
Manual & Downloads
Measurements & Weights
Measurements & Weights
Share
