iTechworld
iTechworld | Base Slimline 4WD Dual Battery Kit | 100Ah Lithium
iTechworld | Base Slimline 4WD Dual Battery Kit | 100Ah Lithium
SKU:KIT-4WD-B-100-SL-25
Couldn't load pickup availability
Get started with dependable off-grid power using the iTechworld Base Slimline 4WD Power System. Compact and efficient, this setup features the iTECH100SX 100Ah Slim Lithium LiFePO₄ Battery paired with a high-performance 25A DCDC + MPPT Charger — delivering fast, safe charging and reliable energy wherever you travel.
The iTECHDCDC25 25A DCDC Charger keeps your battery charged from both your vehicle alternator and solar input, ensuring steady performance while driving or parked. The Plug and Play DCDC Wiring Kit simplifies installation, even in tight canopy or touring builds, for a clean, professional finish.
Perfect for 4WD canopies, camper trailers, small caravans and compact touring setups, the iTechworld Base Slimline 4WD Power System offers a lightweight, efficient and reliable power solution — built tough for Australian conditions.
Specs
| General | |
| Voltage: | 12V |
| Nominal voltage: | 12.8V |
| C20 rating usable Amps: | 100Ah |
| Short circuit protection: | Yes |
| Optimum temperature range: | 5°C ~ 60°C |
| BMS operational temperature range: | 5°C ~ 80°C |
| Safety protection isolator: | 80°C |
| Recommended charge voltage: | 14.4V |
| Maximum charge current: | 100A |
| BMS charge cutoff: | 15V |
| BMS low voltage cutoff: | 10.5V |
| Series connection: | Up to 48V (4 x batteries) |
| Parallel connection: | Unlimited |
| Life cycles @ 80% depth of discharge: | 5,000+ |
| Life cycles @ 40% depth of discharge: | 10,000+ |
| Continuous Discharge: | 150A |
| Maximum Discharge Rate (5 Seconds): | 430A |
| Dimensions (LxWxH): | 394 x 110 x 286mm |
| Weight: | 10.9kg |
| Terminal type: | M8 |
| Case material: | ABS |
| General | |
| Length: | 6m (+ 3m ignition cable extension) |
| Connection: | Three-pin Anderson |
| Thickness: | 6AWG |
| Fuse Size: | 60A |
| Fuse Type: | Midi |
| Includes: | Fuse tap for ignition wire routing |
| DCDC25 Charger | |
| Battery capacity: | 50-500Ah |
| Vehicle input voltage: | 9-32V |
| Solar input voltage: | 10-32V |
| Maximum input current: | 25A |
| Input fuse rating: | 40A |
| Continuous output current: | Up to 25A |
| Output fuse rating: | 40A |
| Minimum auxiliary battery charge start voltage | 4V |
| Standby current: | <10mA |
| Battery type: | Standard lead-acid, Gel, AGM, Calcium & LiFePO4 |
| Operating temperature: | -20°C ~ 80°C |
| IP rating: | IP67 |
| Dimensions (LxWxH): | 150 x 127 x 39mm |
| Weight: | 670g |
| Output | |
| Charge type: | 3-Stage |
| Charging profile: | STD | Gel | AGM | Calcium | LiFePO4 |
| Absorption (maximum output voltage): | 14.4V | 14.1V | 14.7 | 15.3V | 14.5V |
| Float voltage: | 13.4V | 13.5V | 13.4V | 13.6V |
| Input | |
| Input: | Turn on | Turn off |
| 12V standard alternator: | >13.2V | <12.8V |
| 24V standard alternator: | >26.2V | <25.6V |
| 12V smart alternator (ignition cable connected): | >12V | <11.8V |
| 24V smart alternator (ignition cable conencted): | >24V | <23.6V |
| Solar: | 16V & 25W | 10V |
| product dimensions | |
| A | Length: 392mm |
| B | Width: 105mm |
| C | Height: 284mm |
| product dimensions | |
| A | Length: 150mm |
| B | Width: 127mm |
| C | Depth: 39mm |
Manual & Downloads
Measurements & Weights
Measurements & Weights
Share
