Skip to product information
1 of 1

iTechworld

iTechworld | Base Ute Dual Battery Kit | 120Ah Lithium

iTechworld | Base Ute Dual Battery Kit | 120Ah Lithium

SKU:KIT-UTE-B-120-STD-25

Regular price $996.19 AUD
Regular price $1,298.00 AUD Sale price $996.19 AUD
Save 23% Sold out
Taxes included. Shipping calculated at checkout.

Plug and Play | Wiring Kit | DCDC — Options
Quantity

Get started with reliable off-grid power using the iTechworld Base Ute Power System. Featuring the iTECH120X PRO 120Ah Lithium LiFePO₄ Battery and iTECHDCDC25 25A DCDC + MPPT Charger, this setup delivers efficient, stable energy for utes, 4WDs and canopy builds.

The iTECHDCDC25 provides intelligent dual-input charging from both your vehicle alternator and solar panels, ensuring consistent battery performance wherever you travel. The Plug & Play Wiring Kit (No Fitting) makes installation simple and professional, even in tight canopy spaces.

Perfect for utes, touring setups, work vehicles and compact off-grid systems, the iTechworld Base Ute Power System delivers dependable lithium performance, fast charging and long-lasting reliability — built tough for Australian conditions.

Specs
General
Dimensions (LxWxH): 330 x 173 x 215mm
Weight: 13.2kg
Voltage: 12V
Nominal voltage: 12.8V
C20 rating usable Amps: 120Ah
Short circuit protection: Yes
Optimum temperature range: 5°C ~ 60°C
BMS operational temperature range: 5°C ~ 80°C
Safety protection isolator: 80°C
Recommended charge voltage: 14.4V
Maximum charge current: 100A
BMS charge cutoff: 15V
BMS low voltage cutoff: 10.5V
Series connection: Up to 48V (4 x batteries)
Parallel connection: Unlimited
Life cycles @ 80% depth of discharge: 5,000+
Life cycles @ 40% depth of discharge: 10,000+
Continuous Discharge Rate: 150A
Maximum Discharge Rate (5 Seconds): 430A
Terminal type: M8
Case material: ABS
Appliance Power Consumption (A) | Expected Run Time (Hours)
12V camping fridge ( e.g. iFROST ): 0.8-2A | 60-150 hours
LED lights: 0.5A | 240 hours
12V TV: 3-4A | 30-40 hours
Mobile phone charger: 1A | 120 hours
Water pump: 4-5A | 24-30 hours
Appliance Power Consumption (W) | Power Consumption (A) | Expected Run Time (Hours)
Pod coffee machine: 1100W | ~86A | ~1.4 hours
Microwave: 1200W | ~94A | ~1.3 hours
Toaster: 800W | ~63A | ~1.9 hours
Kettle: 1900W | ~148A | ~0.8 hours
Hair dryer: 1800W | ~141A | ~0.9 hours
General
Length: 6m (+ 3m ignition cable extension)
Connection: Three-pin Anderson
Thickness: 6AWG
Fuse Size: 60A
Fuse Type: Midi
Includes: Fuse tap for ignition wire routing
DCDC25 Charger
Battery capacity: 50-500Ah
Vehicle input voltage: 9-32V
Solar input voltage: 10-32V
Maximum input current: 25A
Input fuse rating: 40A
Continuous output current: Up to 25A
Output fuse rating: 40A
Minimum auxiliary battery charge start voltage 4V
Standby current: <10mA
Battery type: Standard lead-acid, Gel, AGM, Calcium & LiFePO4
Operating temperature: -20°C ~ 80°C
IP rating: IP67
Dimensions (LxWxH): 150 x 127 x 39mm
Weight: 670g
Output
Charge type: 3-Stage
Charging profile: STD | Gel | AGM | Calcium | LiFePO4
Absorption (maximum output voltage): 14.4V | 14.1V | 14.7 | 15.3V | 14.5V
Float voltage: 13.4V | 13.5V | 13.4V | 13.6V
Input
Input: Turn on | Turn off
12V standard alternator: >13.2V | <12.8V
24V standard alternator: >26.2V | <25.6V
12V smart alternator (ignition cable connected): >12V | <11.8V
24V smart alternator (ignition cable conencted): >24V | <23.6V
Solar: 16V & 25W | 10V
product dimensions
A Length: 330mm
B Width: 173mm
C Height: 215mm (230mm including terminals)
product dimensions
A Length: 150mm
B Width: 127mm
C Depth: 39mm
Manual & Downloads

Measurements & Weights

View full details