Power your 4WD or touring canopy with the iTechworld Complete 4WD Power System. Built around the iTECH240X PRO 240Ah Lithium LiFePO₄ Battery, this system combines deep-cycle endurance, high-output charging, and clean inverter power for reliable off-grid energy anywhere in Australia.
The iTECHDCDC40 40A DCDC + MPPT Charger keeps your battery topped up from your vehicle alternator or solar input, while the iTECHBC40 40A AC Charger provides fast, reliable mains charging when parked. Stay informed with the iTECHBM500 Battery Monitor with 500A Shunt, giving real-time insights into voltage, current draw, and state of charge.
The 2000W PRO Pure Sine Wave Inverter with integrated ATS and RCD powers high-demand 240V appliances like coffee machines, tools, and induction cooktops, all controlled easily via the RC3 PRO Remote. Heavy-duty 00AWG Inverter Cables with a 250A Maxi Fuse ensure efficiency and protection, while the Plug and Play 40A DCDC Wiring Kit simplifies professional installation.
Perfect for caravans, camper trailers, 4WD canopies, and touring setups, the iTechworld Complete 4WD Power System provides exceptional lithium power, faster recharging, and dependable performance in every environment — all engineered for Australian conditions.
Specs
General
Voltage:
12V
Nominal voltage:
12.8V
C20 rating usable Amps:
240Ah
Short circuit protection:
Yes
Optimum temperature range:
5°C ~ 60°C
BMS operational temperature range:
-5°C ~ 80°C
Safety protection isolator:
80°C
Recommended charge voltage:
14.4V
Maximum charge current:
150A
BMS charge cutoff:
15V
BMS low voltage cutoff:
10.5V
Series connection:
Up to 48V (4 x batteries)
Parallel connection:
Unlimited
Life cycles @ 80% depth of discharge:
5,000+
Life cycles @ 40% depth of discharge:
10,000+
Continuous Discharge Rate:
200A
Maximum Discharge Rate (5 Seconds):
640A
Dimensions (LxWxH):
485 x 170 x 239mm
Weight:
24.8kg
Terminal type:
M8
Case material:
ABS
General
Maximum continuous output:
2000W
Peak output:
4000W
Battery compatibility:
Standard lead-acid, AGM, Gel or LiFePO4
Input voltage range:
10.5-15.5V
Output plug rating:
10A
Output voltage & current:
240V - 50Hz
No load draw:
<1.3A
Efficiency:
90%
Output waveform:
Pure Sine Wave
Total Harmonic Distotion (THD):
<3%
IP rating:
IP22
Operating temperature:
-10°C ~ 50°C
Storage temperature:
-30°C ~ 70°C
Over voltage protection:
15.5±0.2V DC
Under voltage protection:
10.5±0.2V DC
Short circuit protection:
1 second
Dimensions (LxWxH):
459 x 265 x 97mm
AC transfer switch:
30ms
Remote terminal:
RJ12
Remote dimensions (LxWxH):
86 x 86 x 19mm
Safety certifications:
The iTechworld inverter range fully complies with AS/NZS 4763:2011 and IEC/EN 62368-1 including Australian deviations