Power your 4WD or canopy setup with the iTechworld Complete Super Slimline 4WD Power System. Compact yet powerful, this system pairs the iTECH200SS 200Ah Super Slim Lithium LiFePO₄ Battery with high-speed charging, full monitoring and a 2000W inverter — everything you need for dependable off-grid energy in limited space.
The iTECHDCDC40 40A DCDC + MPPT Charger keeps your battery charged from your vehicle or solar input, while the iTECHBC40 40A AC Charger ensures fast top-ups when connected to mains. Real-time power data is tracked through the iTECHBM500 Battery Monitor with 500A Shunt, giving you clear visibility over usage and charge levels.
The 2000W PRO Pure Sine Wave Inverter with integrated ATS and RCD provides clean 240V power for appliances and tools, controlled conveniently via the RC3 PRO Remote. Heavy-duty 00AWG Inverter Cabling and a 250A Maxi Fuse ensure safety and consistent performance, while the Plug & Play Wiring Kit (No Fitting) simplifies installation in tight canopy or touring builds.
Perfect for touring canopies, camper trailers, and compact off-grid systems, this setup delivers powerful lithium performance in a slim, space-saving design. Built for Australian conditions, it’s the ideal combination of capability, simplicity and reliability.
Specs
General
Voltage:
12V
Nominal voltage:
12.8V
C20 rating usable capacity:
200Ah
Short circuit protection:
Yes
Optimum temperature range:
5°C ~ 60°C
BMS operational temperature range:
-40°C ~ 80°C
Safety protection isolator:
80°C
Recommended charge voltage:
14.4V
Maximum charge current:
150A
BMS charge cutoff:
15V
BMS low voltage cutoff:
8.5-9V
Series connection:
Up to 48V (4 x batteries)
Parallel connection:
Unlimited
Life cycles @ 80% depth of discharge:
5,000+
Life cycles @ 40% depth of discharge:
10,000+
Continuous Discharge Rate:
200A
Maximum Discharge Rate (5 Seconds):
640A
Dimensions (LxWxH):
514 x 327 x 126mm (580 L with brackets and 350 H including terminals)
Weight:
25.5kg
Terminal type:
M8
Case material:
Stainless steel
General
Maximum continuous output:
2000W
Peak output:
4000W
Battery compatibility:
Standard lead-acid, AGM, Gel or LiFePO4
Input voltage range:
10.5-15.5V
Output plug rating:
10A
Output voltage & current:
240V - 50Hz
No load draw:
<1.3A
Efficiency:
90%
Output waveform:
Pure Sine Wave
Total Harmonic Distotion (THD):
<3%
IP rating:
IP22
Operating temperature:
-10°C ~ 50°C
Storage temperature:
-30°C ~ 70°C
Over voltage protection:
15.5±0.2V DC
Under voltage protection:
10.5±0.2V DC
Short circuit protection:
1 second
Dimensions (LxWxH):
459 x 265 x 97mm
AC transfer switch:
30ms
Remote terminal:
RJ12
Remote dimensions (LxWxH):
86 x 86 x 19mm
Safety certifications:
The iTechworld inverter range fully complies with AS/NZS 4763:2011 and IEC/EN 62368-1 including Australian deviations