Power your canopy with confidence using the iTechworld Complete Super Slimline Canopy Power System. Designed for advanced off-grid setups, this system combines huge 300Ah lithium storage, fast charging and clean 240V power for touring, work and recreation.
At its core is the iTECH300SS 300Ah Super Slim Lithium LiFePO₄ Battery — high capacity, lightweight and Bluetooth enabled for real-time monitoring. The iTECHDCDC40 40A DCDC + MPPT Charger provides efficient charging from your vehicle or solar, while the iTECHBC40 40A AC Charger keeps your battery topped up at home or at powered sites.
The 2000W PRO Pure Sine Wave Inverter with built-in ATS and RCD delivers safe, stable 240V power for appliances and tools, managed via the RC3 PRO Remote for convenient control. The iTECHBM500 500A Shunt Monitor keeps you informed with accurate readings of current, voltage and remaining capacity.
Installation is simplified with the Plug and Play 40A DCDC Wiring Kit and 00AWG Inverter Cable featuring a 250A Maxi Fuse for safety and reliability. Every component is engineered for performance and durability in tough Australian conditions.
Perfect for canopy builds, caravans, service vehicles and touring rigs, the iTechworld Complete Super Slimline Canopy Power System delivers dependable, high-capacity power with all the essentials — no extra components required.
Specs
General
Voltage:
12V
Nominal voltage:
12.8V
C20 rating usable capacity:
300Ah
Short circuit protection:
Yes
Optimum temperature range:
5°C ~ 60°C
BMS operational temperature range:
-40°C ~ 80°C
Safety protection isolator:
80°C
Recommended charge voltage:
14.4V
Maximum charge current:
150A
BMS charge cutoff:
15V
BMS low voltage cutoff:
8.5-9V
Series connection:
Up to 48V (4 x batteries)
Parallel connection:
Unlimited
Life cycles @ 80% depth of discharge:
5,000+
Life cycles @ 40% depth of discharge:
10,000+
Continuous Discharge Rate:
200A
Maximum Discharge Rate (5 Seconds):
640A
Dimensions (LxWxH):
526 x 126 x 450mm (578 L with brackets and 470 H including terminals)
Weight:
38.25kg
Terminal type:
M8
Case material:
Stainless steel
General
Maximum continuous output:
2000W
Peak output:
4000W
Battery compatibility:
Standard lead-acid, AGM, Gel or LiFePO4
Input voltage range:
10.5-15.5V
Output plug rating:
10A
Output voltage & current:
240V - 50Hz
No load draw:
<1.3A
Efficiency:
90%
Output waveform:
Pure Sine Wave
Total Harmonic Distotion (THD):
<3%
IP rating:
IP22
Operating temperature:
-10°C ~ 50°C
Storage temperature:
-30°C ~ 70°C
Over voltage protection:
15.5±0.2V DC
Under voltage protection:
10.5±0.2V DC
Short circuit protection:
1 second
Dimensions (LxWxH):
459 x 265 x 97mm
AC transfer switch:
30ms
Remote terminal:
RJ12
Remote dimensions (LxWxH):
86 x 86 x 19mm
Safety certifications:
The iTechworld inverter range fully complies with AS/NZS 4763:2011 and IEC/EN 62368-1 including Australian deviations