Skip to product information
1 of 1

iTechworld

iTechworld | Complete Ultra Slimline Canopy Dual Battery Kit | 200Ah Lithium

iTechworld | Complete Ultra Slimline Canopy Dual Battery Kit | 200Ah Lithium

SKU:KIT-CAN-C-200-USL-40

Regular price $2,969.70 AUD
Regular price $3,745.00 AUD Sale price $2,969.70 AUD
Save 21% Sold out
Taxes included. Shipping calculated at checkout.

2000W PRO | Pure Sine Wave Inverter | with ATS and RCD — Options
Plug and Play | Wiring Kit | DCDC — Options
Maxi Fuse with Holder | High Current Fuse and Holder | 175/250/450A — Size
Quantity

The Complete Ultra Slimline Canopy Dual Battery Kit (200Ah) is a balanced, ready-to-install power solution designed for touring canopies where space, reliability, and performance matter. Featuring a slimline 200Ah lithium battery and essential charging, protection, and distribution components, this kit delivers dependable off-grid power for fridges, lighting, and 12V accessories without overcomplicating your setup. Ideal for weekend trips and extended touring alike, it provides a strong foundation for a clean, efficient canopy power system with room to expand.

Specs
General
Dimensions: 554 (572 with terminals) x 62 x 374mm
Weight: 23.1kg
Capacity: 200Ah
Battery type: Lithium LiFePO4
Voltage: 12V
Nominal voltage: 12.8V
Battery operating temperature:: 5°C ~ 60°C
BMS operating temperature: -40°C ~ 80°C
Series: Up to 48V
Parallel Unlimited
Life cycles @ 40% DOD: 10,000+
Life cycles @ 80% DOD: 5,000+
Terminals: M8
Case material: Stainless steel
Charging
Bulk: 14.4V
Current: 1A-150A
High voltage cutoff: 15V
Discharging
Constant: 200A
Maximum: 640A (5 seconds)
Cutoff voltage: 10V
General
Maximum continuous output: 2000W
Peak output: 4000W
Battery compatibility: Standard lead-acid, AGM, Gel or LiFePO4
Input voltage range: 10.5-15.5V
Output plug rating: 10A
Output voltage & current: 240V - 50Hz
No load draw: <1.3A
Efficiency: 90%
Output waveform: Pure Sine Wave
Total Harmonic Distotion (THD): <3%
IP rating: IP22
Operating temperature: -10°C ~ 50°C
Storage temperature: -30°C ~ 70°C
Over voltage protection: 15.5±0.2V DC
Under voltage protection: 10.5±0.2V DC
Short circuit protection: 1 second
Dimensions (LxWxH): 459 x 265 x 97mm
AC transfer switch: 30ms
Remote terminal: RJ12
Remote dimensions (LxWxH): 86 x 86 x 19mm
Safety certifications: The iTechworld inverter range fully complies with AS/NZS 4763:2011 and IEC/EN 62368-1 including Australian deviations
Weight: 7.0kg
General
Battery capacity: 100-1200Ah
Maximum input current: 4.8A
Input fuse rating: 80A
Continuous output current: Up to 40A
Output fuse rating: 60A
Minimum auxiliary battery charge start voltage 4V
Standby current: <18mA
Battery type: Standard lead-acid, Gel, AGM, Calcium & LiFePO4
Operating temperature: -20°C ~ 80°C
IP rating: IP20
Dimensions 275 x 187 x 70mm
Weight: 2.5kg
Output
Charge type: 4-Stage
Charging profile: STD | Gel | AGM | Calcium | LiFePO4
Bulk: 40A
Absorption: 14.4V | 14.1V | 14.7V | 15.5V | 14.4V
Float voltage: 13.4V | 13.5V | 13.4V | 13.6V
DCDC40 Charger
Battery capacity: 80-800Ah
Vehicle input voltage: 9-32V
Solar input voltage: 10-32V
Maximum input current: 45A
Input fuse rating: 60A
Continuous output current: Up to 40A
Output fuse rating: 60A
Minimum auxiliary battery charge start voltage 4V
Standby current: <10mA
Battery type: Standard lead-acid, Gel, AGM, Calcium & LiFePO4
Operating temperature: -20°C ~ 80°C
IP rating: IP67
Dimensions (LxWxH): 188 x 127 x 39mm
Weight: 950g
Output
Charge type: 3-Stage
Charging profile: STD | Gel | AGM | Calcium | LiFePO4
Absorption (maximum output voltage): 14.4V | 14.1V | 14.7 | 15.3V | 14.5V
Float voltage: 13.4V | 13.5V | 13.4V | 13.6V
Input
Input: Turn on | Turn off
12V standard alternator: >13.2V | <12.8V
24V standard alternator: >26.2V | <25.6V
12V smart alternator (ignition cable connected): >12V | <11.8V
24V smart alternator (ignition cable conencted): >24V | <23.6V
Solar: 16V & 25W | 10V
General
Length: 6m (+ 3m ignition cable extension)
Connection: Three-pin Anderson
Thickness: 6AWG
Fuse Size: 60A
Fuse Type: Midi
Includes: Fuse tap for ignition wire routing
General
Cable gauge: 00AWG/70mm²
Cable length: 1m
Fuse type: 250A ANS
Terminals: M8
Measurement
Maximum measured current 500A
Supply voltage 10–100V
Battery capacity range 10–999Ah
Voltage accuracy ±1%
Current accuracy ±1%
Battery compatibility Lithium, lead-acid, nickel-metal hydride
Power Consumption
Screen off <2mA
Screen brightness at 10% <20mA
Screen brightness at 100% <60mA
Physical & Installation
Exterior bracket dimensions (L x W x H) 106 x 81 x 18mm
Mounting bracket points (L x W) 95 x 70mm
Monitor backing dimensions (L x W x H) 80 x 59 x 16mm
Shielded cable length 3m
B+ sense wire 22AWG, 1m
IP rating IP20
Operating temperature -20°C to 80°C
Warranty
Warranty 1 year
product dimensions
Length 554mm (579.5mm with terminals)
Width 63mm
Height with brackets 440mm
Height without brackets 374mm
product dimensions
A Length: 459mm
B Width: 265mm
C Depth: 97mm
product dimensions
A Length: 275mm
B Width: 187mm
C Height: 70mm
product dimensions
A Length: 188mm
B Width: 127mm
C Depth: 39mm
product dimensions
A Length: 106mm
B Width: 81mm
C Height: 18mm
Manual & Downloads

Measurements & Weights

View full details