Skip to product information
1 of 1

iTechworld

iTechworld | Complete Ultra Slimline Canopy Dual Battery Kit | 300Ah Lithium

iTechworld | Complete Ultra Slimline Canopy Dual Battery Kit | 300Ah Lithium

SKU:KIT-CAN-C-300-USL-40

Regular price $3,306.95 AUD
Regular price $4,394.00 AUD Sale price $3,306.95 AUD
Save 25% Sold out
Taxes included. Shipping calculated at checkout.

Quantity

The Complete Ultra Slimline Canopy Dual Battery Kit (300Ah) delivers increased capacity and longer runtimes for canopy setups powering multiple accessories. With a slimline 300Ah lithium battery and a carefully matched selection of charging and protection components, this kit provides dependable energy for fridges, lighting, and 12V gear during extended trips. It’s an ideal solution for travellers who want more power without sacrificing valuable canopy space.

Specs
General
Dimensions: 562 (580 with terminals) x 82 x 374mm
Weight: 31.2kg
Capacity: 300Ah
Battery type: Lithium LiFePO4
Voltage: 12V
Nominal voltage: 12.8V
Battery operating temperature:: 5°C ~ 60°C
BMS operating temperature: -40°C ~ 80°C
Series: Up to 48V
Parallel Unlimited
Life cycles @ 80% DOD: 5,000+
Life cycles @ 40% DOD: 10,000+
Terminals: M8
Case material: Stainless steel
Charging
Bulk: 14.4V
Current: 1A-150A
High voltage cutoff: 15V
Discharging
Constant: 200A
Maximum: 640A (5 seconds)
Cutoff voltage: 10V
General
Maximum continuous output: 2000W
Peak output: 4000W
Battery compatibility: Standard lead-acid, AGM, Gel or LiFePO4
Input voltage range: 10.5-15.5V
Output plug rating: 10A
Output voltage & current: 240V - 50Hz
No load draw: <1.3A
Efficiency: 90%
Output waveform: Pure Sine Wave
Total Harmonic Distotion (THD): <3%
IP rating: IP22
Operating temperature: -10°C ~ 50°C
Storage temperature: -30°C ~ 70°C
Over voltage protection: 15.5±0.2V DC
Under voltage protection: 10.5±0.2V DC
Short circuit protection: 1 second
Dimensions (LxWxH): 459 x 265 x 97mm
AC transfer switch: 30ms
Remote terminal: RJ12
Remote dimensions (LxWxH): 86 x 86 x 19mm
Safety certifications: The iTechworld inverter range fully complies with AS/NZS 4763:2011 and IEC/EN 62368-1 including Australian deviations
Weight: 7.0kg
DCDC40 Charger
Battery capacity: 80-800Ah
Vehicle input voltage: 9-32V
Solar input voltage: 10-32V
Maximum input current: 45A
Input fuse rating: 60A
Continuous output current: Up to 40A
Output fuse rating: 60A
Minimum auxiliary battery charge start voltage 4V
Standby current: <10mA
Battery type: Standard lead-acid, Gel, AGM, Calcium & LiFePO4
Operating temperature: -20°C ~ 80°C
IP rating: IP67
Dimensions (LxWxH): 188 x 127 x 39mm
Weight: 950g
Output
Charge type: 3-Stage
Charging profile: STD | Gel | AGM | Calcium | LiFePO4
Absorption (maximum output voltage): 14.4V | 14.1V | 14.7 | 15.3V | 14.5V
Float voltage: 13.4V | 13.5V | 13.4V | 13.6V
Input
Input: Turn on | Turn off
12V standard alternator: >13.2V | <12.8V
24V standard alternator: >26.2V | <25.6V
12V smart alternator (ignition cable connected): >12V | <11.8V
24V smart alternator (ignition cable conencted): >24V | <23.6V
Solar: 16V & 25W | 10V
General
Battery capacity: 100-1200Ah
Maximum input current: 4.8A
Input fuse rating: 80A
Continuous output current: Up to 40A
Output fuse rating: 60A
Minimum auxiliary battery charge start voltage 4V
Standby current: <18mA
Battery type: Standard lead-acid, Gel, AGM, Calcium & LiFePO4
Operating temperature: -20°C ~ 80°C
IP rating: IP20
Dimensions 275 x 187 x 70mm
Weight: 2.5kg
Output
Charge type: 4-Stage
Charging profile: STD | Gel | AGM | Calcium | LiFePO4
Bulk: 40A
Absorption: 14.4V | 14.1V | 14.7V | 15.5V | 14.4V
Float voltage: 13.4V | 13.5V | 13.4V | 13.6V
General
Length: 6m (+ 3m ignition cable extension)
Connection: Three-pin Anderson
Thickness: 6AWG
Fuse Size: 60A
Fuse Type: Midi
Includes: Fuse tap for ignition wire routing
General
Cable gauge: 00AWG/70mm²
Cable length: 1m
Fuse type: 250A ANS
Terminals: M8
Measurement
Maximum measured current 500A
Supply voltage 10–100V
Battery capacity range 10–999Ah
Voltage accuracy ±1%
Current accuracy ±1%
Battery compatibility Lithium, lead-acid, nickel-metal hydride
Power Consumption
Screen off <2mA
Screen brightness at 10% <20mA
Screen brightness at 100% <60mA
Physical & Installation
Exterior bracket dimensions (L x W x H) 106 x 81 x 18mm
Mounting bracket points (L x W) 95 x 70mm
Monitor backing dimensions (L x W x H) 80 x 59 x 16mm
Shielded cable length 3m
B+ sense wire 22AWG, 1m
IP rating IP20
Operating temperature -20°C to 80°C
Warranty
Warranty 1 year
General
Dimensions (LxWxH): 86 x 86 x 19mm
product dimensions
A Length: 562mm (580mm with terminals)
B Width: 82mm
Height (with brackets) 440mm
Height (without brackets) 374mm
product dimensions
A Length: 459mm
B Width: 265mm
C Depth: 97mm
product dimensions
A Length: 188mm
B Width: 127mm
C Depth: 39mm
product dimensions
A Length: 275mm
B Width: 187mm
C Height: 70mm
product dimensions
A Length: 106mm
B Width: 81mm
C Height: 18mm
product dimensions
A Length: 86mm
B Width: 86mm
C Depth: 19mm
Manual & Downloads

Measurements & Weights

View full details