Expand your touring or canopy setup with the iTechworld Expansion 4WD Power System. Built around the iTECH240X PRO 240Ah Lithium LiFePO₄ Battery, this system delivers high-capacity storage, smart energy management and pure sine wave power — all in one clean, integrated package.
The iTechworld Premium Control Hub includes a 40A DCDC + MPPT Charger and 500A Shunt for efficient dual-input charging and precise energy monitoring. The 2000W PRO Pure Sine Wave Inverter with ATS and RCD provides reliable 240V power for appliances and tools, easily managed with the RC3 PRO Remote.
Stay powered anywhere with the 200W Hard Frame Solar Panel, while the iTECHBC40 40A AC Charger ensures fast mains charging when parked. Heavy-duty 00AWG Inverter Cables with a 250A Maxi Fuse and the Plug and Play 40A DCDC Wiring Kit keep installation simple, safe and professional.
All components are secured with the iTechworld Battery Tray, creating a stable foundation for long-term reliability in touring, canopy or off-grid builds.
Perfect for 4WD canopies, caravans, service vehicles and touring setups, the iTechworld Expansion 4WD Power System delivers serious energy capacity, integrated control and solar freedom — built tough for Australian conditions.
Specs
General
Voltage:
12V
Nominal voltage:
12.8V
C20 rating usable Amps:
240Ah
Short circuit protection:
Yes
Optimum temperature range:
5°C ~ 60°C
BMS operational temperature range:
-5°C ~ 80°C
Safety protection isolator:
80°C
Recommended charge voltage:
14.4V
Maximum charge current:
150A
BMS charge cutoff:
15V
BMS low voltage cutoff:
10.5V
Series connection:
Up to 48V (4 x batteries)
Parallel connection:
Unlimited
Life cycles @ 80% depth of discharge:
5,000+
Life cycles @ 40% depth of discharge:
10,000+
Continuous Discharge Rate:
200A
Maximum Discharge Rate (5 Seconds):
640A
Dimensions (LxWxH):
485 x 170 x 239mm
Weight:
24.8kg
Terminal type:
M8
Case material:
ABS
General
Maximum continuous output:
2000W
Peak output:
4000W
Battery compatibility:
Standard lead-acid, AGM, Gel or LiFePO4
Input voltage range:
10.5-15.5V
Output plug rating:
10A
Output voltage & current:
240V - 50Hz
No load draw:
<1.3A
Efficiency:
90%
Output waveform:
Pure Sine Wave
Total Harmonic Distotion (THD):
<3%
IP rating:
IP22
Operating temperature:
-10°C ~ 50°C
Storage temperature:
-30°C ~ 70°C
Over voltage protection:
15.5±0.2V DC
Under voltage protection:
10.5±0.2V DC
Short circuit protection:
1 second
Dimensions (LxWxH):
459 x 265 x 97mm
AC transfer switch:
30ms
Remote terminal:
RJ12
Remote dimensions (LxWxH):
86 x 86 x 19mm
Safety certifications:
The iTechworld inverter range fully complies with AS/NZS 4763:2011 and IEC/EN 62368-1 including Australian deviations
Weight:
7.0kg
Control Hub
Dimensions (LxWxH):
403 x 304 x 116mm
Dimensions w/ DCDC (LxWxH):
403 x 304 x 119mm
Outputs:
2 x 12V 15A cigarette outputs USB-C output 3 x QC3.0
Inputs/outputs:
4 x 50A Anderson plugs
Inputs:
3-pin 50A Anderson plug (DCDC alternator input) 50A Anderson plug (DCDC solar input)