Expand your canopy or ute setup with the iTechworld Expansion Ute Power System. Built around the iTECH120X PRO 120Ah Lithium LiFePO₄ Battery and Premium Control Hub, this all-in-one system delivers powerful, reliable and easily managed energy — perfect for touring, work or off-grid adventures.
The Premium Control Hub includes a 25A DCDC + MPPT Charger and 500A Shunt for fast dual-input charging and accurate system monitoring. Pair it with the 1000W Pure Sine Wave Inverter for stable 240V power on demand, safely protected by 0AWG Inverter Cables and a 175A Maxi Fuse.
The iTECHBC25 25A AC Charger provides quick mains charging when parked, while the 200W Hard Frame Solar Panel extends your runtime with renewable power. The Plug & Play Wiring Kit (No Fitting) makes installation simple, even in tight canopy or tray spaces, and the iTechworld Battery Tray ensures a secure, durable mount.
Perfect for 4WD utes, canopy builds, service vehicles and off-grid touring, the iTechworld Expansion Ute Power System delivers a smart, scalable and dependable energy setup — built for Australian conditions.
Specs
General
Dimensions (LxWxH):
330 x 173 x 215mm
Weight:
13.2kg
Voltage:
12V
Nominal voltage:
12.8V
C20 rating usable Amps:
120Ah
Short circuit protection:
Yes
Optimum temperature range:
5°C ~ 60°C
BMS operational temperature range:
5°C ~ 80°C
Safety protection isolator:
80°C
Recommended charge voltage:
14.4V
Maximum charge current:
100A
BMS charge cutoff:
15V
BMS low voltage cutoff:
10.5V
Series connection:
Up to 48V (4 x batteries)
Parallel connection:
Unlimited
Life cycles @ 80% depth of discharge:
5,000+
Life cycles @ 40% depth of discharge:
10,000+
Continuous Discharge Rate:
150A
Maximum Discharge Rate (5 Seconds):
430A
Terminal type:
M8
Case material:
ABS
Appliance
Power Consumption (A) | Expected Run Time (Hours)
12V camping fridge ( e.g. iFROST ):
0.8-2A | 60-150 hours
LED lights:
0.5A | 240 hours
12V TV:
3-4A | 30-40 hours
Mobile phone charger:
1A | 120 hours
Water pump:
4-5A | 24-30 hours
Appliance
Power Consumption (W) | Power Consumption (A) | Expected Run Time (Hours)
Pod coffee machine:
1100W | ~86A | ~1.4 hours
Microwave:
1200W | ~94A | ~1.3 hours
Toaster:
800W | ~63A | ~1.9 hours
Kettle:
1900W | ~148A | ~0.8 hours
Hair dryer:
1800W | ~141A | ~0.9 hours
Control Hub
Dimensions (LxWxH):
403 x 304 x 116mm
Dimensions w/ DCDC (LxWxH):
403 x 304 x 119mm
Outputs:
2 x 12V 15A cigarette outputs USB-C output 3 x QC3.0
Inputs/outputs:
4 x 50A Anderson plugs
Inputs:
3-pin 50A Anderson plug (DCDC alternator input) 50A Anderson plug (DCDC solar input)
Battery Monitor
Supply voltage:
10V-100V
Battery capacity:
10Ah-999Ah
Maximum measured current:
500A
Power consumption (screen off):
<2mA
Power consumption (screen brightness @ 10%):
<20mA
Power consumption (screen brightness @ 100%):
<60mA
Voltage accuracy:
±1%
Current accuracy:
±1%
Capacity accuracy:
±1%
Operating temperature:
-20°C ~ 80°C
IP rating:
IP20
DCDC25 Charger
Battery capacity:
50-500Ah
Vehicle input voltage:
9-32V
Solar input voltage:
10-32V
Maximum input current:
25A
Input fuse rating:
40A
Continuous output current:
Up to 25A
Output fuse rating:
40A
Minimum auxiliary battery charge start voltage
4V
Standby current:
<10mA
Battery type:
Standard lead-acid, Gel, AGM, Calcium & LiFePO4
Operating temperature:
-20°C ~ 80°C
IP rating:
IP67
Dimensions (LxWxH):
150 x 127 x 39mm
Weight:
670g
Output
Charge type:
3-Stage
Charging profile:
STD | Gel | AGM | Calcium | LiFePO4
Absorption (maximum output voltage):
14.4V | 14.1V | 14.7 | 15.3V | 14.5V
Float voltage:
13.4V | 13.5V | 13.4V | 13.6V
Input
Input:
On | Off
12V standard alternator:
>13.2V | <12.8V
24V standard alternator:
>26.2V | <25.6V
12V smart alternator (ignition cable connected):
>12V | <11.8V
24V smart alternator (ignition cable conencted):
>24V | <23.6V
Solar:
16V & 25W | 10V
General
Maximum continuous output:
1000W
Peak output:
2000W
Battery compatibility:
Standard lead-acid, AGM, Gel or LiFePO4
Input voltage range:
10.5-15.5V
Output plug rating:
10A
Output voltage & current:
240V - 50Hz
No load draw:
<1.2A
Efficiency:
88%
Output waveform:
Pure Sine Wave
Total Harmonic Distotion (THD):
<3%
IP rating:
IP22
Operating temperature:
-10°C ~ 50°C
Storage temperature:
-30°C ~ 70°C
Over voltage protection:
15.5±0.2V DC
Under voltage protection:
10.5±0.2V DC
Short circuit protection:
1 second
Dimensions (LxWxH):
353 x 204 x 81mm
Safety certifications:
The iTechworld inverter range fully complies with AS/NZS 4763:2011 and IEC/EN 62368-1 including Australian deviations