Take your off-grid setup to the next level with the iTechworld Ultimate 4WD Power System. Built around the iTECH240X PRO 240Ah Lithium LiFePO₄ Battery, this system combines high-capacity storage, fast charging, pure sine wave power and solar input for total energy independence on the road.
The iTECHDCDC40 40A DCDC + MPPT Charger provides efficient dual-input charging from your vehicle or solar panels, while the iTECHBC40 40A AC Charger ensures reliable top-ups from mains power when parked. The iTECHBM500 Battery Monitor with 500A Shunt gives real-time visibility into voltage, current and battery health, so you always know exactly how your system is performing.
The 2000W PRO Pure Sine Wave Inverter with built-in ATS and RCD delivers clean, stable 240V power for appliances and tools, all controlled via the RC3 PRO Remote. Heavy-duty 00AWG Inverter Cables and a 250A Maxi Fuse provide safety and efficiency, while the Plug and Play 40A DCDC Wiring Kit makes installation simple and professional, even in tight canopy spaces.
The included 200W Hard Frame Solar Panel extends your range with renewable power, keeping your battery topped up wherever you pull up to camp.
Perfect for 4WD canopies, caravans, camper trailers and off-grid touring setups, the iTechworld Ultimate 4WD Power System delivers everything you need for serious, reliable, and long-lasting power — all engineered for Australian conditions.
Specs
General
Voltage:
12V
Nominal voltage:
12.8V
C20 rating usable Amps:
240Ah
Short circuit protection:
Yes
Optimum temperature range:
5°C ~ 60°C
BMS operational temperature range:
-5°C ~ 80°C
Safety protection isolator:
80°C
Recommended charge voltage:
14.4V
Maximum charge current:
150A
BMS charge cutoff:
15V
BMS low voltage cutoff:
10.5V
Series connection:
Up to 48V (4 x batteries)
Parallel connection:
Unlimited
Life cycles @ 80% depth of discharge:
5,000+
Life cycles @ 40% depth of discharge:
10,000+
Continuous Discharge Rate:
200A
Maximum Discharge Rate (5 Seconds):
640A
Dimensions (LxWxH):
485 x 170 x 239mm
Weight:
24.8kg
Terminal type:
M8
Case material:
ABS
General
Maximum continuous output:
2000W
Peak output:
4000W
Battery compatibility:
Standard lead-acid, AGM, Gel or LiFePO4
Input voltage range:
10.5-15.5V
Output plug rating:
10A
Output voltage & current:
240V - 50Hz
No load draw:
<1.3A
Efficiency:
90%
Output waveform:
Pure Sine Wave
Total Harmonic Distotion (THD):
<3%
IP rating:
IP22
Operating temperature:
-10°C ~ 50°C
Storage temperature:
-30°C ~ 70°C
Over voltage protection:
15.5±0.2V DC
Under voltage protection:
10.5±0.2V DC
Short circuit protection:
1 second
Dimensions (LxWxH):
459 x 265 x 97mm
AC transfer switch:
30ms
Remote terminal:
RJ12
Remote dimensions (LxWxH):
86 x 86 x 19mm
Safety certifications:
The iTechworld inverter range fully complies with AS/NZS 4763:2011 and IEC/EN 62368-1 including Australian deviations