Take your 4WD or canopy setup to the next level with the iTechworld Ultimate Super Slimline 4WD Power System. Combining slimline design with serious power, this system features the iTECH200SS 200Ah Super Slim Lithium LiFePO₄ Battery alongside high-output charging, pure sine wave power and solar integration for complete off-grid freedom.
The iTECHDCDC40 40A DCDC + MPPT Charger keeps your battery charged from both vehicle and solar input, while the iTECHBC40 40A AC Charger ensures fast top-ups from mains power when parked. Real-time energy tracking is handled by the iTECHBM500 Battery Monitor with 500A Shunt, so you always know exactly how much power you have left.
The 2000W PRO Pure Sine Wave Inverter with built-in ATS and RCD delivers clean 240V power for appliances and tools, with convenient control via the RC3 PRO V2 Remote. Heavy-duty 00AWG Inverter Cables and a 250A Maxi Fuse ensure safe and efficient power delivery, while the Plug and Play 40A DCDC Wiring Kit makes installation straightforward even in tight spaces.
For renewable charging, the included 200W Hard Frame Solar Panel keeps your system topped up wherever you camp — providing extended off-grid capability without relying on a generator.
Perfect for touring canopies, camper trailers and compact off-grid 4WD systems, the iTechworld Ultimate Super Slimline 4WD Power System delivers the ideal mix of power, portability and reliability — all built tough for Australian conditions.
Specs
General
Voltage:
12V
Nominal voltage:
12.8V
C20 rating usable capacity:
200Ah
Short circuit protection:
Yes
Optimum temperature range:
5°C ~ 60°C
BMS operational temperature range:
-40°C ~ 80°C
Safety protection isolator:
80°C
Recommended charge voltage:
14.4V
Maximum charge current:
150A
BMS charge cutoff:
15V
BMS low voltage cutoff:
8.5-9V
Series connection:
Up to 48V (4 x batteries)
Parallel connection:
Unlimited
Life cycles @ 80% depth of discharge:
5,000+
Life cycles @ 40% depth of discharge:
10,000+
Continuous Discharge Rate:
200A
Maximum Discharge Rate (5 Seconds):
640A
Dimensions (LxWxH):
514 x 327 x 126mm (580 L with brackets and 350 H including terminals)
Weight:
25.5kg
Terminal type:
M8
Case material:
Stainless steel
General
Maximum continuous output:
2000W
Peak output:
4000W
Battery compatibility:
Standard lead-acid, AGM, Gel or LiFePO4
Input voltage range:
10.5-15.5V
Output plug rating:
10A
Output voltage & current:
240V - 50Hz
No load draw:
<1.3A
Efficiency:
90%
Output waveform:
Pure Sine Wave
Total Harmonic Distotion (THD):
<3%
IP rating:
IP22
Operating temperature:
-10°C ~ 50°C
Storage temperature:
-30°C ~ 70°C
Over voltage protection:
15.5±0.2V DC
Under voltage protection:
10.5±0.2V DC
Short circuit protection:
1 second
Dimensions (LxWxH):
459 x 265 x 97mm
AC transfer switch:
30ms
Remote terminal:
RJ12
Remote dimensions (LxWxH):
86 x 86 x 19mm
Safety certifications:
The iTechworld inverter range fully complies with AS/NZS 4763:2011 and IEC/EN 62368-1 including Australian deviations