Power your entire canopy with the iTechworld Ultimate Super Slimline Canopy Power System. Designed for serious off-grid performance, this modular system combines huge 300Ah lithium storage with high-output charging, pure sine wave power and integrated solar capability.
At the heart of the system is the iTECH300SS 300Ah Super Slim Lithium LiFePO₄ Battery — compact, lightweight and Bluetooth enabled for real-time monitoring. Charging is handled by the iTECHDCDC40 40A DCDC + MPPT Charger for fast vehicle and solar input, and the iTECHBC40 40A AC Charger for rapid top-ups from mains power.
The 2000W PRO Pure Sine Wave Inverter with built-in ATS and RCD provides safe, reliable 240V power for high-demand tools and appliances, controlled conveniently via the RC3 PRO Remote. System monitoring comes from the iTECHBM500 500A Shunt Monitor, ensuring you always know your power status at a glance.
Heavy-duty 00AWG inverter cabling with a 250A Maxi Fuse delivers secure power distribution, while the Plug and Play 40A DCDC Wiring Kit simplifies installation in tight canopy builds. The included 200W Hard Frame Solar Panel keeps your system charged from the sun wherever you pull up.
Perfect for canopy builds, caravans, service vehicles and off-grid setups, this system offers the ultimate balance of power, safety and flexibility. Built tough for Australian conditions, it’s the dependable choice for serious off-grid professionals and long-term travelers alike.
When reliability matters most, the iTechworld Ultimate Super Slimline Canopy Power System delivers uncompromising performance and total energy freedom.
Specs
| General |
|
| Voltage: |
12V |
| Nominal voltage: |
12.8V |
| C20 rating usable capacity: |
300Ah |
| Short circuit protection: |
Yes |
| Optimum temperature range: |
5°C ~ 60°C |
| BMS operational temperature range: |
-40°C ~ 80°C |
| Safety protection isolator: |
80°C |
| Recommended charge voltage: |
14.4V |
| Maximum charge current: |
150A |
| BMS charge cutoff: |
15V |
| BMS low voltage cutoff: |
8.5-9V |
| Series connection: |
Up to 48V (4 x batteries) |
| Parallel connection: |
Unlimited |
| Life cycles @ 80% depth of discharge: |
5,000+ |
| Life cycles @ 40% depth of discharge: |
10,000+ |
| Continuous Discharge Rate: |
200A |
| Maximum Discharge Rate (5 Seconds): |
640A |
| Dimensions (LxWxH): |
526 x 126 x 450mm (578 L with brackets and 470 H including terminals) |
| Weight: |
38.25kg |
| Terminal type: |
M8 |
| Case material: |
Stainless steel |
| General |
|
| Maximum continuous output: |
2000W |
| Peak output: |
4000W |
| Battery compatibility: |
Standard lead-acid, AGM, Gel or LiFePO4 |
| Input voltage range: |
10.5-15.5V |
| Output plug rating: |
10A |
| Output voltage & current: |
240V - 50Hz |
| No load draw: |
<1.3A |
| Efficiency: |
90% |
| Output waveform: |
Pure Sine Wave |
| Total Harmonic Distotion (THD): |
<3% |
| IP rating: |
IP22 |
| Operating temperature: |
-10°C ~ 50°C |
| Storage temperature: |
-30°C ~ 70°C |
| Over voltage protection: |
15.5±0.2V DC |
| Under voltage protection: |
10.5±0.2V DC |
| Short circuit protection: |
1 second |
| Dimensions (LxWxH): |
459 x 265 x 97mm |
| AC transfer switch: |
30ms |
| Remote terminal: |
RJ12 |
| Remote dimensions (LxWxH): |
86 x 86 x 19mm |
| Safety certifications: |
The iTechworld inverter range fully complies with AS/NZS 4763:2011 and IEC/EN 62368-1 including Australian deviations |
| Weight: |
7.0kg |
| DCDC40 Charger |
|
| Battery capacity: |
80-800Ah |
| Vehicle input voltage: |
9-32V |
| Solar input voltage: |
10-32V |
| Maximum input current: |
45A |
| Input fuse rating: |
60A |
| Continuous output current: |
Up to 40A |
| Output fuse rating: |
60A |
| Minimum auxiliary battery charge start voltage |
4V |
| Standby current: |
<10mA |
| Battery type: |
Standard lead-acid, Gel, AGM, Calcium & LiFePO4 |
| Operating temperature: |
-20°C ~ 80°C |
| IP rating: |
IP67 |
| Dimensions (LxWxH): |
188 x 127 x 39mm |
| Weight: |
950g |
| Output |
|
| Charge type: |
3-Stage |
| Charging profile: |
STD | Gel | AGM | Calcium | LiFePO4 |
| Absorption (maximum output voltage): |
14.4V | 14.1V | 14.7 | 15.3V | 14.5V |
| Float voltage: |
13.4V | 13.5V | 13.4V | 13.6V |
| Input |
|
| Input: |
Turn on | Turn off |
| 12V standard alternator: |
>13.2V | <12.8V |
| 24V standard alternator: |
>26.2V | <25.6V |
| 12V smart alternator (ignition cable connected): |
>12V | <11.8V |
| 24V smart alternator (ignition cable conencted): |
>24V | <23.6V |
| Solar: |
16V & 25W | 10V |
| General |
|
| Battery capacity: |
100-1200Ah |
| Maximum input current: |
4.8A |
| Input fuse rating: |
80A |
| Continuous output current: |
Up to 40A |
| Output fuse rating: |
60A |
| Minimum auxiliary battery charge start voltage |
4V |
| Standby current: |
<18mA |
| Battery type: |
Standard lead-acid, Gel, AGM, Calcium & LiFePO4 |
| Operating temperature: |
-20°C ~ 80°C |
| IP rating: |
IP20 |
| Dimensions |
275 x 187 x 70mm |
| Weight: |
2.5kg |
| Output |
|
| Charge type: |
4-Stage |
| Charging profile: |
STD | Gel | AGM | Calcium | LiFePO4 |
| Bulk: |
40A |
| Absorption: |
14.4V | 14.1V | 14.7V | 15.5V | 14.4V |
| Float voltage: |
13.4V | 13.5V | 13.4V | 13.6V |
| General |
|
| Length: |
6m (+ 3m ignition cable extension) |
| Connection: |
Three-pin Anderson |
| Thickness: |
6AWG |
| Fuse Size: |
60A |
| Fuse Type: |
Midi |
| Includes: |
Fuse tap for ignition wire routing |
| General |
|
| Maximum wattage: |
200W |
| Max voltage: |
18.1V |
| Open-circuit voltage: |
22V |
| Short circuit current: |
12.2A |
| Normal Operating Cell Temperature (NOCT): |
45+2°C |
| Maximum system voltage: |
1000VDC |
| Maximum series fuse rating: |
15A |
| Operating temperature: |
-40°C ~ 85°C |
| Cable length: |
85cm |
| Dimensions (LxWxH): |
1460 x 670 x 17mm |
| Weight: |
9.32kg |
| General |
|
| Cable gauge: |
00AWG/70mm² |
| Cable length: |
1m |
| Fuse type: |
250A ANS |
| Terminals: |
M8 |
| Measurement |
|
| Maximum measured current |
500A |
| Supply voltage |
10–100V |
| Battery capacity range |
10–999Ah |
| Voltage accuracy |
±1% |
| Current accuracy |
±1% |
| Battery compatibility |
Lithium, lead-acid, nickel-metal hydride |
| Power Consumption |
|
| Screen off |
<2mA |
| Screen brightness at 10% |
<20mA |
| Screen brightness at 100% |
<60mA |
| Physical & Installation |
|
| Exterior bracket dimensions (L x W x H) |
106 x 81 x 18mm |
| Mounting bracket points (L x W) |
95 x 70mm |
| Monitor backing dimensions (L x W x H) |
80 x 59 x 16mm |
| Shielded cable length |
3m |
| B+ sense wire |
22AWG, 1m |
| IP rating |
IP20 |
| Operating temperature |
-20°C to 80°C |
| Warranty |
|
| Warranty |
1 year |
| General |
|
| Dimensions (LxWxH): |
86 x 86 x 19mm |
| product dimensions |
| A |
Length (with brackets): 578mm |
| A |
Length (without brackets): 526mm |
| B |
Width: 126mm |
| C |
Height (with brackets): 470.3mm |
| C |
Height (without brackets): 450mm |
| product dimensions |
| A |
Length: 459mm |
| B |
Width: 265mm |
| C |
Depth: 97mm |
| product dimensions |
| A |
Length: 188mm |
| B |
Width: 127mm |
| C |
Depth: 39mm |
| product dimensions |
| A |
Length: 275mm |
| B |
Width: 187mm |
| C |
Height: 70mm |
| product dimensions |
| A |
Length 1460mm |
| B |
Width: 670mm |
| C |
Height: 17mm |
| product dimensions |
| A |
Length: 106mm |
| B |
Width: 81mm |
| C |
Height: 18mm |
| product dimensions |
| A |
Length: 86mm |
| B |
Width: 86mm |
| C |
Depth: 19mm |
Manual & Downloads