iTechworld
Outback | Solar Generator Kit | PS2800 PRO Power Station and 400W Solar Blanket
Outback | Solar Generator Kit | PS2800 PRO Power Station and 400W Solar Blanket
SKU:ITW-BTPS2800PRO+ITW-SB400
Couldn't load pickup availability
The PS2800 PRO is an Australian-designed portable lithium power station built to run your caravan aircon, pull a proper espresso, cook on the induction top and charge the drone, cameras and laptops, all from one unit you can carry to camp.
At its core is a 180Ah LiFePO4 battery (2160Wh) paired with a 2800W pure sine wave 240V AC output (5600W peak). Pure sine wave matters: it runs high-draw appliances and sensitive gear clean and stable rather than merely running. With 2800W on tap and a 5600W surge rating, the PS2800 PRO handles caravan aircon, induction cooktops and coffee machines, while running sensitive gear like CPAP machines, Starlink and laptops cleanly at the same time.
The PS2800 PRO connects to the iTechworld app over Bluetooth (available on iOS and Android), giving you control of every port from your phone. Recharge fully from a standard 240V wall plug in just 1.5 hours thanks to an 1800W AC input, or top up from your car while you drive, or from the included 400W Solar Blanket.
Pass-through charging keeps your devices powered while the unit charges, and the UPS function switches to battery within 10ms during a mains outage, so it doubles as home backup.
Need more capacity? The PS2800 PRO expands to 10,800Wh with up to four EB2160 expansion batteries. On its own, the 2160Wh battery runs a typical 12V fridge (0.8A draw) for around 9 days, giving you days of power rather than hours through the longest trips.
The A-grade LiFePO4 cells are rated for 4000+ cycles to 80% capacity, which works out to up to 10 years of daily use.
Keeping it charged in the field is the 400W Solar Blanket with Raptor Skin. iTechworld's HPX PRO monocrystalline cells use rear-contact architecture instead of the visible front-facing metal contacts found on traditional panels, for maximum sunlight exposure and higher performance in all light conditions. Each cell carries the same exclusive Raptor Skin coating, an anti-reflective, self-cleaning, scratch-resistant layer that keeps the blanket cleaner for longer and sustains efficiency by maintaining optimal operating temperatures. Built to an IP64 rating, it's protected against dust ingress and splashes from any direction, and it's hail-proof and shock-resistant, built to handle dusty tracks or a sudden shower without missing a beat. Delivering up to 400W and 20.8A, it folds down for transport and comes with an 8AWG 5m extension lead, Anderson-to-eyelets connector, solar charge controller and user guide.
Designed in Australia for Australian conditions.
Key Features
- 2800W Pure Sine Wave AC 240V output, 5600W peak
- 180Ah LiFePO4 battery (2160Wh)
- Bluetooth app control (iOS & Android) — monitor and manage every port from your phone
- 0–100% in 1.5 hours from a standard 240V wall plug
- Solar recharge via the included 400W Solar Blanket, dual independent MPPT input (2 x XT90), up to 600W each
- Pass-through charging — run appliances while the unit charges
- UPS switch-over in under 10ms for seamless mains-to-battery transfer
- Expandable to 10,800Wh with up to four EB2160 expansion batteries
- Runs a 12V fridge (0.8A draw) for approx. 9 days
- Over 4,000 cycle life to 80% capacity
- 400W / 20.8A max Solar Blanket with HPX PRO monocrystalline cells
- Exclusive Raptor Skin coating — anti-reflective, self-cleaning, scratch-resistant
- IP64 rated, hail-proof and shock-resistant solar blanket
- Built-in 3W LED light on the PS2800 PRO
- Australian designed
Package Contents
- 1 x PS2800 PRO Portable Power Station
- 1 x AC Charger
- 1 x Car Charger
- 1 x XT90 to Anderson Adaptor
- 1 x Cable Storage Bag
- 1 x User Guide
- 1 x 400W Solar Blanket with Raptor Skin
- 1 x 8AWG 5m Extension Lead
- 1 x Anderson to Eyelets Connector
- 1 x Solar Charge Controller
- 1 x Solar Blanket User Guide
Support
The PS2800 PRO carries a 12-month statutory warranty. The 400W Solar Blanket also carries a 12-month statutory warranty.
Specs
| PS2800 PRO Portable Lithium Power Station | |
| General | |
| Dimensions (LxWxH): | 402 x 269 x 336mm |
| Weight: | 21.7kg |
| Connectivity: | Bluetooth (iOS & Android) |
| AC input: | 220–240V 50–60Hz / Adjustable up to 1800W Max |
| DC / Solar input (MPPT): | 11.5–55V / 600W Max Each (2 x XT90) |
| Off grid mode: | 2800W Max |
| UPS mode: | 2310W Max (<10ms switchover) |
| Operating temperature: | -10°C ~ 40°C |
| Charging temperature: | 0°C ~ 40°C |
| Cycle life: | >4000 times |
| Warranty: | 12 months |
| Battery | |
| Battery type: | LiFePO4 |
| Battery capacity: | 2160Wh / 180Ah @ 12V |
| Maximum parallel capacity: | 10,800Wh (4 x EB2160) |
| Input & Output | |
| AC output: | 220–240V 50–60Hz. Rated at 2800W Pure Sine Wave, 5600W peak. Inbuilt overload and short circuit protection. |
| AC outlets: | 3 x 15A |
| XT60 output: | 12V 25A Max |
| Cigarette lighter output: | 12V / 10A |
| DC 12V outputs: | 2 x 3A Max |
| USB-C outputs: | 2 x 140W Max |
| USB QC3.0 outputs: | 2 x 18W Max |
| LED light: | 3W |
| 400W Solar Blanket with Raptor Skin | |
| General | |
| Cell type: | HPX PRO Technology Monocrystalline |
| Solar cell lamination: | ETFE Raptor Skin |
| Canvas material: | 1680D ballistic nylon |
| Power tolerance: | ±5% |
| Maximum power output: | 400W |
| Maximum power voltage: | 19.2V |
| Maximum power current: | 20.8A |
| Open circuit voltage: | 22.7V |
| Short circuit current: | 21.7A |
| Dimensions (Open) (LxWxH): | 3220 x 5 x 750mm |
| Dimensions (Closed) (LxWxH): | 750 x 50 x 605mm |
| Operating temperature: | -40°C ~ 85°C |
| Weight: | 10.3kg |
| IP rating: | IP64 |
| Warranty: | 12 months |
| General | |
| Dimensions (LxWxH): | 402 x 269 x 336mm |
| Weight: | 21.7kg |
| Connectivity: | Bluetooth ( iOS & Android ) |
| AC input: | 220–240V 50–60Hz / Adjustable up to 1800W Max |
| DC / Solar input (MPPT): | 11.5–55V / 600W Max Each (2 x XT90) |
| AC output: | 220–240V 50–60Hz. Rated at 2800W Pure Sine Wave, 5600W peak. Inbuilt overload and short circuit protection. |
| AC outlets: | 3 x 15A |
| XT60 output: | 12V 25A Max |
| Cigarette lighter output: | 12V / 10A |
| DC 12V outputs: | 2 x 3A Max |
| USB-C outputs: | 2 x 140W Max |
| USB QC3.0 outputs: | 2 x 18W Max |
| LED light: | 3W |
| Off grid mode: | 2800W Max |
| UPS mode: | 2310W Max (<10ms switchover) |
| Operating temperature: | -10°C ~ 40°C |
| Charging temperature: | 0°C ~ 40°C |
| Cycle life: | >4000 times |
| Battery | |
| Battery type: | LiFePO4 |
| Battery capacity: | 2160Wh / 180Ah @ 12V |
| Maximum parallel capacity: | 10,800Wh (4 x EB2160) |
| General | |
| Cell type: | HPX PRO Technology Monocrystalline |
| Solar cell lamination: | ETFE Raptor Skin |
| Canvas material: | 1680D ballistic nylon |
| Power tolerance: | ±5% |
| Maximum power output: | 400W |
| Maximum power voltage: | 19.2V |
| Maximum power current: | 20.8A |
| Open circuit voltage: | 22.7V |
| Short circuit current: | 21.7A |
| Dimensions | |
| Dimensions (Open) (LxWxH): | 3220 x 5 x 750mm |
| Dimensions (Closed) (LxWxH): | 750 x 50 x 605mm |
| Operating temperature: | -40°C ~ 85°C |
| Weight: | 10.3kg |
| product dimensions | |
| A | Height: 336mm |
| B | Width: 269mm |
| C | Length: 402mm |
| product dimensions | |
| A | Length: 3220mm |
| B | Width: 5mm |
| C | Height: 750mm |
| Folded (LxWxH) | 750 x 50 x 605mm |
Manual & Downloads
Measurements & Weights
Measurements & Weights
Share








